Installation - Ceiling Receiver

Home › Smart › Wireless Lighting Systems › Instructions › Ceiling Receiver

---

A lighting scene is made up of a combination of lights. Each light included within a scene has to be connected to a wireless receiver unit, controlled by a wireless controller. There are two types of receiver a ceiling mounted unit and a floor unit, each have to be wired into the relevant lighting circuit.

Ceiling Receiver

For the Ceiling receiver you will have to remove the lights you are including and trace the cabling, wiring the Ceiling receiver into the lighting circuit as per IEE wiring regulations. Before you refit the lights a simple coding and addressing procedure is carried out so that the controllers and receivers communicate with each other.

Safety Instructions

• This product should be installed in accordance with the applicable parts of the building regulations,and the current edition of the IEE Wiring Regulations (BS 7671: Requirements for electrical installations) and appropriate statutory regulations. In the Republic of Ireland the installation must be in accordance with the ETCI National Rules for Electrical Installations – ET 101.
• Before commencing work, switch OFF the mains supply and remove appropriate fuse or switch off the circuit breaker.
• Do not install ceiling receivers on lighting circuits used to supply other products such as extractor fans and shaver socket outlets.

Installation Diagram